Knife gate valve, type 7400

Type 7400 is a uni-directional knife gate valve and is a good choice when used for abrasive fluids such as pulp & paper, waste water, bio mass and mining slurries. Tightness in one direction will be secured with a resilient elastomer and metal seal. The valve can be delivered with rising or non-rising spindle. Actuation is provided with a hand wheel, chain wheel, gearbox, pneumatic- or with electrical actuation.

** Please contact us for different sizes and pressures.

Category:

Description

Knife gate valve, wafer type
Shut-off valve for water and waste water up to 50°C
DN50 – 800, PN10 – 16
Face-to-face length DIN EN 558-1, basic series 20

General information

  • Mono block body
  • Body: of ductile iron GGG40-50
  • Seat: EPDM
  • Knife: stainless steel 1.4301
  • Tight in one flow direction
  • (Non) rising spindle: stainless steel 1.4021
  • Flange connection dimensions to EN1092, PN10 or PN16
  • Operating pressure:
    • DN50 – DN125, 10 bar
    • DN150, 8 bar
    • DN200, 7 bar
    • DN250 – DN300, 5 bar
    • DN350 – DN400, 4 bar
    • DN450 – DN700, 3 bar
    • DN800, 2 bar
  • Operation with hand wheel
  • Test standard according to EN12266-1
  • Certificate EN 10204 3.1

Corrosion protection

  • Inside and outside epoxy-coated, coating thickness >250 µm, blue RAL 5010

Additional information

DN/NPS

Operating pressure

10 bar (DN50 – 125), 8 bar (DN150), 7 bar (DN200), 5 bar (DN250 – 300), 4 bar (DN350 – 400), 3 bar (DN450 – 700), 2 bar (DN800)

Flange connection

,

Face to face length

EN 558-1/20

Test standard

EN 12266-1

Application

, ,

Datasheets (PDF)

Type 7400 knife gate valve datasheet
AUMA actuator selection table
Pneumatic actuator selection table
Type 7400 knife gate valve tender text

You may also like…